This is [MARLIN-E3S1PROFORK-BYTT]. A Fork of Marlin 2.1.x-bugfix with the Creality Ender 3 S1 Pro source code included. Personal tweaks, fixes and enhancements included. This firmware is for the Ender 3 S1 Pro (touchscreen) and Ender 3 S1 Plus (touchscreen).
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
e4fc272796
Hi all, as there is a firmware out for Ender 3 S1 Pro out and i am not satisfied with its basic hardware configuration i decided to release my own firmware build for the Ender 3 S1 Pro with F1 chip. My firmware does: - Ender 3 S1 Pro only - correct bed size (235x235) - printing height 250 to respect the cable - x-max position 235 to respect the cable - y-max position 235 to reach every point of the bed - correct homeing offsets - correct nozzle to probe offsets - Z-Offset set to 0.0 in order calibrate for your printer - Linear Advance set to 0.06 - biliniear bedleveling - probing margin bumped to 40mm to get a square mesh - no preheat before leveling, set what you want for that before leveling. - pidtemp and piditemp set to values of my runs with stock bed, but calibrate for your printer please besides that this standard features of the Original Release are also active: - 117 Set LCD Message supported - Z Axis Microstepping set to .01 increments - M851 and M290 changes update Z-Offset on LCD - Z-Offset UI updates notifies host - Restore Bedleveling after G28 - M48 Probe Repeatability Test - Extruder minimum temperature lowered to 170C - Heatbreak fan extruder minimum temperature set to 80C - Probing Margin reduced to 40mm (ABL) - Fast / Slow / Slow probing strategy - G26 Mesh Validation - 5 x 5 Bilinear Mesh (25 points) (ABL) - G12 Clean the Nozzle - Include ADC values when reporting temperature - Emergency Parser - Auto Report Position - Report Fan Changes for fans that support it - Host Action Commands - Host Prompt Support - M486 Cancel Objects You will be able to print with at least 233mmx233mm with this release. Please check your slicer settings before using it. Your bed will now beginn at exactly x=0 and y=0. There is no need to do any corrections in slicer like "G0 X-5". Attached a picture with a 233x233 print for bedleveling i just did. Its not leveled perfectly, just wanted to show the cabability to print nearly full bed... Hope you like it. |
1 year ago | |
|---|---|---|
| 323mmx323mm-Ender3S1Pro.HEIC | 1 year ago | |
| EnderS1Pro-LinearAdvance-001.HEIC | 1 year ago | |
| LICENSE | 1 year ago | |
| README.md | 1 year ago | |
| firmware-20230206-114443_noLA.bin | 1 year ago | |
| firmware-20230207-081153.bin | 1 year ago | |
| firmware-20230208-093514_F1.bin | 1 year ago | |
README.md
MarlinFirmware
Personal tweaks and builds of marlin 3d printer firmware repositories.
Source code is here: https://github.com/ThomasToka/MarlinbySynman/tree/bugfix-2.1.x-tweakedbyThomasToka