|
|
|
|
@ -19,6 +19,18 @@ My instructions for firmware installations are:
|
|
|
|
|
- on the touch start autoleveling (there is no need to do the points if your bed was level before..)
|
|
|
|
|
- after autoleveling your are ready to print.
|
|
|
|
|
|
|
|
|
|
Alternative method:
|
|
|
|
|
|
|
|
|
|
Do it your way as usual. You can set your z-offset by gcode, by touch display, by other terminal. However you do it.
|
|
|
|
|
This firmware is installable as every other firmware.
|
|
|
|
|
|
|
|
|
|
Note:
|
|
|
|
|
Touch display firmware 1.0.2 or 1.0.3 is required. But if you have the recent vendor firmware running you should have
|
|
|
|
|
already one this touch firmware versions installed and be fine.
|
|
|
|
|
The folder for the F4 installation on the sdcard is STM32F4_UPDATE .
|
|
|
|
|
Put the firmware inside this folder on a 4096kb formated sdcard.
|
|
|
|
|
Reboot your printer.
|
|
|
|
|
|
|
|
|
|
-------------------------------------------------------------------------------------------------------------------
|
|
|
|
|
Update 23.02.2023 19:47 CET:
|
|
|
|
|
|
|
|
|
|
|
ThomasToka
1 year ago
committed by
GitHub