From 3d3f5d8d9de8527f1ce35548b19364528a64ba23 Mon Sep 17 00:00:00 2001
From: ThomasToka <117008525+ThomasToka@users.noreply.github.com>
Date: Thu, 18 May 2023 11:57:21 +0200
Subject: [PATCH] Update README.md (Plus instructions updated)

---
 README.md | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/README.md b/README.md
index 5a35411..b43dc2b 100644
--- a/README.md
+++ b/README.md
@@ -50,7 +50,8 @@ G1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
 G1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
 
 Check also the set dimensions of the buildplate in your slicer. Most slicers have 220mm x 220 mm (Pro) or 300mm x 300mm (Plus) cause of the not
-matching firmware. The bed has 235mm x 235mm (Pro) or 310mm x 315mm (Plus) physically and so the firmware is configured.
+matching firmware. The bed has 235mm x 235mm on the Pro. On the Plus we have a special situation: The nozzle can´t reach the last 5mm on y max.
+So we capped here 5mm. The configured printarea for the Plus is 310mm x 310mm.
 Please set this values as your printarea in you slicer.
 
 -------------------------------------------------------------------------------------------------------------------