Archives/MarlinFirmware
2
0
Fork 0
mirror of https://github.com/ThomasToka/MarlinFirmware.git synced 2024-11-10 13:10:25 +00:00
Code Issues Packages Projects Releases Wiki Activity

Update README.md

Browse Source 
typos
This commit is contained in:
ThomasToka 2023-02-08 15:57:49 +01:00 committed by GitHub
parent 0e8c703de3
commit 202c3e15a6
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
README.md
View File

@ -8,15 +8,15 @@ Instructions:
Please do the following two tests:
1.)
- best is to start with leveled bed
- best is to start with a leveled bed
- flash the firmware
- reset to defaults via screen
- heat up nozzle end bed to your desired temerature
- heat up nozzle and bed to your desired temerature
- g28
- got to leveling on the screen
- got to point 2
- set initial z-offset on this point that it has a around 2mm clearance (this is not final leveling
- go to points 3,4,5 an check if it nozzle to bed matches point 2, turn the wheels under bed to patch thos 2 mm..
- go to points 3,4,5 an check if it nozzle to bed matches point 2, turn the wheels under bed to patch those 2 mm..
- go back to point 2, lower your z-offset to your desired height via screen (paper method, gauge, etc)
- go to points 3,4,5 and adjust those with the wheels to match point 2
- go around 2-3 times
@ -26,10 +26,10 @@ Please do the following two tests:
- watch your g-code for the x position of your purge lines. your bad now starts exactly at x=0 and y=0
2.)
- best is to start with leveled bed
- best is to start with a leveled bed
- flash the firmware
- reset to defaults via screen
- heat up nozzle end bed to your desired temerature
- heat up nozzle and bed to your desired temerature
- g28
- got to leveling on the screen
- got to point 1