You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

38 lines
1.1 KiB
Markdown

2 years ago
## Openwrt 19.07.8 image for TP-Link MR200v4
3 years ago
3 years ago
Install via TFTP. Rename openwrt_19.07.8_tp_recovery.bin to tp_recovery.bin. Copy tp_recovery.bin to TFTP directory.\
3 years ago
TFTP server IP address 192.168.0.225 netmask 255.255.255.0. Turn off all firewalls.
3 years ago
3 years ago
1. Power off router
3 years ago
2. Connect router to your TFTP server
3. Press WPS/RESET while you power on router, keep pressed for 10s
3 years ago
4. TFTP loading should now start
5. Wait until router has restarted
3 years ago
6. Log in with browser to 192.168.1.1
3 years ago
3 years ago
\
3 years ago
After succcess full installation you need to add your wwan interface.
1. Network - interfaces
2. Add new interface
3 years ago
3. Name: wwan\
3 years ago
Protocol: QMI Cellular\
3 years ago
-Create interface
3 years ago
5. General Settings -\
3 years ago
Modem device: /dev/cdc-wdm0\
3 years ago
Add your APN settings
3 years ago
6. Advanced Settings - Modem timeout: 20
3 years ago
7. Firewall Settings - Create / Assign firewall-zon\
-Save\
3 years ago
-Save & Apply
3 years ago
3 years ago
\
Log in via ssh and add dhcp = 0 to your wwan configuration.\
`uci show network`\
`uci set network.wwan.dhcp=0`\
3 years ago
`uci commit network`
3 years ago
Restart your wwan interface
3 years ago
\
You can revert back to TP-Link firmware with back_to_TPlink_tp_recovery.bin. It´s based on Archer MR200(EU)_V4_210201.