Farm-Data-Relay-System/Sensors/DS18B20_8266/DS18B20_8266.ino
2021-11-26 12:29:34 -06:00

69 lines
1.8 KiB
C++

// FARM DATA RELAY SYSTEM
//
// DS18B20 SENSOR MODULE
//
// Developed by Timm Bogner (bogner1@gmail.com) for Sola Gratia Farm in Urbana, Illinois, USA.
// Each reading is assigned a two-byte identifier along with a one-byte sensor type
//
#define READING_ID 29 //Unique integer for each data reading
#define GTWY_MAC 0x00 //Gateway MAC
#define SLEEPYTIME 30 //Time to sleep in seconds
#define ONE_WIRE_BUS 13 //Pin that the DS18B20 is connected to
#include <ESP8266WiFi.h>
#include <espnow.h>
#include <OneWire.h>
#include <DallasTemperature.h>
#include "DataReading.h"
uint8_t broadcastAddress[] = {0xAA, 0xBB, 0xCC, 0xDD, 0xEE, GTWY_MAC};
int wait_time = 0;
OneWire oneWire(ONE_WIRE_BUS);
DallasTemperature sensors(&oneWire);
void OnDataSent(uint8_t *mac_addr, uint8_t sendStatus) {
Serial.print("Last Packet Send Status: ");
if (sendStatus == 0) {
Serial.println("Delivery success");
}
else {
Serial.println("Delivery fail");
}
}
void setup() {
Serial.begin(115200);
WiFi.mode(WIFI_STA);
if (esp_now_init() != 0) {
return;
}
esp_now_set_self_role(ESP_NOW_ROLE_COMBO);
esp_now_register_send_cb(OnDataSent);
// Register peer
esp_now_add_peer(broadcastAddress, ESP_NOW_ROLE_COMBO, 0, NULL, 0);
sensors.begin();
}
void loop() {
if (millis() > wait_time) {
wait_time = wait_time + SLEEPYTIME * 1000;
loadData();
}
}
void loadData() {
sensors.requestTemperatures(); // Send the command to get temperatures
float tempC = sensors.getTempCByIndex(0);
DataReading Temp;
Temp.id = READING_ID;
Temp.t = 1;
// if (tempC = DEVICE_DISCONNECTED_C) Temp.d = -69.00;
// else Temp.d = tempC;
Temp.d = tempC;
esp_now_send(broadcastAddress, (uint8_t *) &Temp, sizeof(Temp));
}