mirror of
https://github.com/timmbogner/Farm-Data-Relay-System
synced 2024-11-10 07:10:42 +00:00
78 lines
2.4 KiB
C
78 lines
2.4 KiB
C
// FARM DATA RELAY SYSTEM
|
|
//
|
|
// GATEWAY 2.000 Configuration
|
|
|
|
#include <fdrs_globals.h>
|
|
#define FDRS_DEBUG //Enable USB-Serial debugging
|
|
#define DEBUG_CONFIG // Displays full config info on startup
|
|
|
|
#define UNIT_MAC 0x01 // The address of this gateway
|
|
|
|
#define USE_ESPNOW
|
|
//#define USE_LORA
|
|
//#define USE_WIFI
|
|
|
|
// Actions -- Define what happens when a packet arrives at each interface:
|
|
// .
|
|
|
|
#define ESPNOWG_ACT sendSerial();
|
|
#define SERIAL_ACT sendESPNow(0x02); sendLoRaNbr(1); sendESPNowPeers();
|
|
#define MQTT_ACT
|
|
#define LORAG_ACT sendSerial();
|
|
// Neighbor Actions
|
|
#define ESPNOW1_ACT
|
|
#define ESPNOW2_ACT
|
|
#define LORA1_ACT sendSerial();
|
|
#define LORA2_ACT
|
|
|
|
// Functions available:
|
|
// sendESPNowNbr(int neighbor); sendESPNowPeers();
|
|
// sendLoRaNbr(neighbor); broadcastLoRa();
|
|
// sendSerial(); sendMQTT();
|
|
|
|
|
|
|
|
// Protocols -- Define which protocols the gateway will use.
|
|
// Warning: ESP-NOW and WiFi should not be used simultaneously.
|
|
|
|
// Neighboring gateway addresses
|
|
#define ESPNOW_NEIGHBOR_1 0x0E // ESPNOW1 Address
|
|
#define ESPNOW_NEIGHBOR_2 0xFF // ESPNOW2 Address
|
|
#define LORA_NEIGHBOR_1 0x02 // LoRa1 Address
|
|
#define LORA_NEIGHBOR_2 0xFF // LoRa2 Address
|
|
|
|
|
|
// LoRa Configuration
|
|
#define RADIOLIB_MODULE SX1276 //Tested on SX1276
|
|
#define LORA_SS 18
|
|
#define LORA_RST 14
|
|
#define LORA_DIO 26
|
|
#define LORA_TXPWR 17 // LoRa TX power in dBm (: +2dBm - +17dBm (for SX1276-7) +20dBm (for SX1278))
|
|
#define LORA_ACK // Request LoRa acknowledgment.
|
|
|
|
//Pins for UART data interface (ESP32 only)
|
|
#define RXD2 14
|
|
#define TXD2 15
|
|
|
|
// WiFi and MQTT Credentials -- Override the global settings
|
|
//#define WIFI_SSID "Your SSID"
|
|
//#define WIFI_PASS "Your Password"
|
|
//#define MQTT_ADDR "192.168.0.8"
|
|
//#define MQTT_PORT 1883 // Default MQTT port is 1883
|
|
|
|
//#define MQTT_AUTH //Enable MQTT authentication
|
|
//#define MQTT_USER "Your MQTT Username"
|
|
//#define MQTT_PASS "Your MQTT Password"
|
|
|
|
//Logging settings -- Logging will occur when MQTT is disconnected
|
|
//#define USE_SD_LOG //Enable SD-card logging
|
|
//#define USE_FS_LOG //Enable filesystem (flash) logging
|
|
#define LOGBUF_DELAY 10000 // Log Buffer Delay - in milliseconds
|
|
#define SD_SS 0 //SD card CS pin (Use different pins for LoRa and SD)
|
|
#define LOG_FILENAME "fdrs_log.csv"
|
|
|
|
///#define USE_OLED
|
|
#define OLED_HEADER "FDRS"
|
|
#define OLED_SDA 4
|
|
#define OLED_SCL 15
|
|
#define OLED_RST 16 |