mirror of
https://github.com/timmbogner/Farm-Data-Relay-System
synced 2024-11-10 07:10:42 +00:00
94 lines
2.8 KiB
C
94 lines
2.8 KiB
C
// FARM DATA RELAY SYSTEM
|
|
//
|
|
// GATEWAY 2.000 Configuration
|
|
|
|
//#include <fdrs_globals.h> //Uncomment if you install the globals file
|
|
#define FDRS_DEBUG //Enable USB-Serial debugging
|
|
|
|
#define UNIT_MAC 0x01 // The address of this gateway
|
|
|
|
//Actions -- Define what happens when a packet arrives at each interface:
|
|
// Current function options are: sendESPNOW(MAC), sendSerial(), sendMQTT(),
|
|
// bufferLoRa(interface), bufferESPNOW(interface), bufferSerial(), and bufferMQTT().
|
|
|
|
#define ESPNOWG_ACT sendSerial();
|
|
#define SERIAL_ACT
|
|
#define MQTT_ACT
|
|
#define LORAG_ACT sendSerial();
|
|
|
|
//#define USE_LORA
|
|
//#define USE_WIFI //Used only for MQTT gateway
|
|
//#define USE_SD_LOG //Used only for SD-card logging
|
|
//#define USE_FS_LOG //Used only for SPIFFS logging (esp internal filesystem)
|
|
|
|
// Peer addresses
|
|
#define ESPNOW1_PEER 0x0E // ESPNOW1 Address
|
|
#define ESPNOW2_PEER 0x0F // ESPNOW2 Address
|
|
#define LORA1_PEER 0x0E // LoRa1 Address
|
|
#define LORA2_PEER 0x0F // LoRa2 Address
|
|
|
|
// Peer Actions
|
|
#define ESPNOW1_ACT
|
|
#define ESPNOW2_ACT
|
|
#define LORA1_ACT
|
|
#define LORA2_ACT
|
|
|
|
//Pins for UART data interface (ESP32 only)
|
|
#define RXD2 14
|
|
#define TXD2 15
|
|
|
|
//SPI Configuration -- Needed only on Boards with multiple SPI interfaces like the ESP32
|
|
|
|
#define SPI_SCK 5
|
|
#define SPI_MISO 19
|
|
#define SPI_MOSI 27
|
|
|
|
//LoRa Configuration -- Needed only if using LoRa
|
|
#define LORA_SS 18
|
|
#define LORA_RST 14
|
|
#define LORA_DIO0 26
|
|
|
|
//433E6 for Asia
|
|
//866E6 for Europe
|
|
//915E6 for North America
|
|
#define LORA_BAND 915E6
|
|
#define LORA_SF 7
|
|
|
|
// Buffer Delays - in milliseconds - Uncomment to enable any buffer
|
|
|
|
//#define ESPNOW1_DELAY 0
|
|
//#define ESPNOW2_DELAY 0
|
|
//#define ESPNOWG_DELAY 0
|
|
//#define SERIAL_DELAY 0
|
|
//#define MQTT_DELAY 0
|
|
//#define LORAG_DELAY 1000
|
|
//#define LORA1_DELAY 1000
|
|
//#define LORA2_DELAY 1000
|
|
|
|
//#define USE_LED //Not yet fully implemented
|
|
#define LED_PIN 32
|
|
#define NUM_LEDS 4
|
|
|
|
//WiFi and MQTT Credentials -- Needed only for MQTT gateway
|
|
#define WIFI_SSID "Your SSID"
|
|
#define WIFI_PASS "Your Password"
|
|
#define MQTT_ADDR "192.168.0.8"
|
|
#define MQTT_PORT 1883 // Default MQTT port is 1883
|
|
|
|
//MQTT Credentials -- Needed only if MQTT broker requires authentication
|
|
//#define MQTT_AUTH //uncomment to enable MQTT authentication
|
|
#define MQTT_USER "Your MQTT Username"
|
|
#define MQTT_PASS "Your MQTT Password"
|
|
|
|
// MQTT Topics
|
|
#define TOPIC_DATA "fdrs/data"
|
|
#define TOPIC_STATUS "fdrs/status"
|
|
#define TOPIC_COMMAND "fdrs/command"
|
|
|
|
|
|
// SD card logging config -- Needed only for SD-card logging
|
|
#define SD_SS 0 //SD card Chipselect pin (Use a different pins for LoRa and SD)
|
|
#define SD_FILENAME "fdrs_log.csv" // length max. 32
|
|
|
|
// Internal flash logging config -- Needed only for internal flash logging
|
|
#define FS_FILENAME "fdrs_log.csv" // length max. 32
|