diff --git a/FDRS_Gateway2000/README.md b/FDRS_Gateway2000/README.md
index 3af11d0..f6a93c3 100644
--- a/FDRS_Gateway2000/README.md
+++ b/FDRS_Gateway2000/README.md
@@ -8,7 +8,7 @@ The following commands re-send data instantaneously: ```sendESPNOW(MAC)```, ```s
 
 The following commands send data to buffers to be released at an interval: ```bufferLoRa(interface)```, ```bufferESPNOW(interface)```, ```bufferSerial()```, and ```bufferMQTT()```.
 
-In the following example, the gateway is set to take any ESP-NOW packet it receives and send it first over the serial port, then re-transmit via ESP-NOW it to another gaweway with the address 0x01:
+In the following example, the gateway is set to take any ESP-NOW packet it receives and send it first over the serial port, then re-transmit via ESP-NOW it to another gateway with the address 0x01:
 ```
 #define ESPNOWG_ACT sendSerial(); sendESPNOW(0x01);
 ```
@@ -28,7 +28,7 @@ BAND and SF (spreading factor) can also be configured in 'fdrs_globals.h' if ena
 Enables WiFi. Used only on the MQTT gateway.
 
 SSID, password, and MQTT credentials are also configurable in 'fdrs_globals.h'.
-### #define USE_LED
+### ```#define USE_LED```
 This option initializes FastLED! I haven't developed this very much, perhaps you have ideas?
 
 ## Peers