bringing it to the gateway

untested
pull/125/head
Timm Bogner 2 years ago
parent f4b7e9546f
commit 7ff846e5af

@ -130,42 +130,69 @@ enum {
#else
// ASSERT("NO MQTT password defined! Please define in fdrs_globals.h (recommended) or in fdrs_sensor_config.h");
#endif //MQTT_PASS
#if defined (MQTT_AUTH) || defined (GLOBAL_MQTT_AUTH)
#define FDRS_MQTT_AUTH
#endif //MQTT_AUTH
#endif //USE_WIFI
#ifdef USE_LORA
// select LoRa band configuration
#if defined(LORA_BAND)
#define FDRS_BAND LORA_BAND
#elif defined (GLOBAL_LORA_BAND)
#define FDRS_BAND GLOBAL_LORA_BAND
#else
// ASSERT("NO LORA-BAND defined! Please define in fdrs_globals.h (recommended) or in fdrs_sensor_config.h");
#endif //LORA_BAND
#if defined(LORA_FREQUENCY)
#define FDRS_LORA_FREQUENCY LORA_FREQUENCY
#else
#define FDRS_LORA_FREQUENCY GLOBAL_LORA_FREQUENCY
#endif //LORA_FREQUENCY
// select LoRa SF configuration
#if defined(LORA_SF)
#define FDRS_SF LORA_SF
#elif defined (GLOBAL_LORA_SF)
#define FDRS_SF GLOBAL_LORA_SF
#else
// ASSERT("NO LORA-SF defined! Please define in fdrs_globals.h (recommended) or in fdrs_sensor_config.h");
#define FDRS_LORA_SF LORA_SF
#else
#define FDRS_LORA_SF GLOBAL_LORA_SF
#endif //LORA_SF
// select LoRa TXPWR configuration
// select LoRa ACK Timeout configuration
#if defined(LORA_ACK_TIMEOUT)
#define FDRS_ACK_TIMEOUT LORA_ACK_TIMEOUT
#else
#define FDRS_ACK_TIMEOUT GLOBAL_ACK_TIMEOUT
#endif //LORA_ACK_TIMEOUT
// select LoRa Retry configuration
#if defined(LORA_RETRIES)
#define FDRS_LORA_RETRIES LORA_RETRIES
#else
#define FDRS_LORA_RETRIES GLOBAL_LORA_RETRIES
#endif //LORA_RETRIES
// select LoRa Tx Power configuration
#if defined(LORA_TXPWR)
#define FDRS_TXPWR LORA_TXPWR
#elif defined (GLOBAL_LORA_TXPWR)
#define FDRS_TXPWR GLOBAL_LORA_TXPWR
#else
// ASSERT("NO LORA-TXPWR defined! Please define in fdrs_globals.h (recommended) or in fdrs_sensor_config.h");
#define FDRS_LORA_TXPWR LORA_TXPWR
#else
#define FDRS_LORA_TXPWR GLOBAL_LORA_TXPWR
#endif //LORA_TXPWR
// select LoRa BANDWIDTH configuration
#if defined(LORA_BANDWIDTH)
#define FDRS_LORA_BANDWIDTH LORA_BANDWIDTH
#else
#define FDRS_LORA_BANDWIDTH GLOBAL_LORA_BANDWIDTH
#endif //LORA_BANDWIDTH
// select LoRa Coding Rate configuration
#if defined(LORA_CR)
#define FDRS_LORA_CR LORA_CR
#else
#define FDRS_LORA_CR GLOBAL_LORA_CR
#endif //LORA_CR
// select LoRa SyncWord configuration
#if defined(LORA_SYNCWORD)
#define FDRS_LORA_SYNCWORD LORA_SYNCWORD
#else
#define FDRS_LORA_SYNCWORD GLOBAL_LORA_SYNCWORD
#endif //LORA_SYNCWORD
#endif //USE_LORA
#define MAC_PREFIX 0xAA, 0xBB, 0xCC, 0xDD, 0xEE // Should only be changed if implementing multiple FDRS systems.
@ -207,15 +234,6 @@ uint8_t ESPNOW1[] = {MAC_PREFIX, ESPNOW_NEIGHBOR_1};
uint8_t ESPNOW2[] = {MAC_PREFIX, ESPNOW_NEIGHBOR_2};
#ifdef USE_LORA
uint16_t LoRa1 = ((mac_prefix[4] << 8) | LORA_NEIGHBOR_1); // Use 2 bytes for LoRa addressing instead of previous 3 bytes
uint16_t LoRa2 = ((mac_prefix[4] << 8) | LORA_NEIGHBOR_2);
uint16_t loraGwAddress = ((selfAddress[4] << 8) | selfAddress[5]); // last 2 bytes of gateway address
uint16_t loraBroadcast = 0xFFFF;
unsigned long receivedLoRaMsg = 0; // Number of total LoRa packets destined for us and of valid size
unsigned long ackOkLoRaMsg = 0; // Number of total LoRa packets with valid CRC
#endif
#if defined (USE_SD_LOG) || defined (USE_FS_LOG)
char logBuffer[512];
uint16_t logBufferPos = 0; // datatype depends on size of sdBuffer

@ -1,8 +1,17 @@
#ifdef USE_LORA
RADIOLIB_MODULE radio = new Module(LORA_SS, LORA_DIO0, LORA_RST, LORA_DIO1);
bool transmitFlag = false;// flag to indicate transmission or reception state
volatile bool enableInterrupt = true;// disable interrupt when it's not needed
volatile bool operationDone = false;// flag to indicate that a packet was sent or received
uint16_t LoRa1 = ((mac_prefix[4] << 8) | LORA_NEIGHBOR_1); // Use 2 bytes for LoRa addressing instead of previous 3 bytes
uint16_t LoRa2 = ((mac_prefix[4] << 8) | LORA_NEIGHBOR_2);
uint16_t loraGwAddress = ((selfAddress[4] << 8) | selfAddress[5]); // last 2 bytes of gateway address
uint16_t loraBroadcast = 0xFFFF;
unsigned long receivedLoRaMsg = 0; // Number of total LoRa packets destined for us and of valid size
unsigned long ackOkLoRaMsg = 0; // Number of total LoRa packets with valid CRC
#if defined(ESP8266) || defined(ESP32)
ICACHE_RAM_ATTR
#endif
@ -15,6 +24,7 @@ void setFlag(void) {
operationDone = true;
}
#endif
#ifdef USE_LORA
void transmitLoRa(uint16_t* destMac, DataReading * packet, uint8_t len) {
@ -91,8 +101,8 @@ void begin_lora() {
// #ifdef ESP32
// SPI.begin(SPI_SCK, SPI_MISO, SPI_MOSI);
// #endif
#ifdef USE_LORA
int state = radio.begin(FDRS_BAND, 125.0, FDRS_SF, 5, 0x12, LORA_TXPWR, 8, 1);
#ifdef USE_LORA
int state = radio.begin(FDRS_LORA_BAND, FDRS_LORA_BANDWIDTH, FDRS_LORA_SF, FDRS_LORA_CR, FDRS_LORA_SYNCWORD, FDRS_LORA_TXPWR, 8, 1);
if (state == RADIOLIB_ERR_NONE) {
DBG("RadioLib initialization successful!");
} else {

@ -18,7 +18,8 @@
#include <RadioLib.h>
#endif
//Default values assigned if none present in config
// Internal Globals
// Default values that are assigned if none are present in config
#define GLOBAL_ACK_TIMEOUT 400 // LoRa ACK timeout in ms. (Minimum = 200)
#define GLOBAL_LORA_RETRIES 2 // LoRa ACK automatic retries [0 - 3]

Loading…
Cancel
Save