Farm-Data-Relay-System/FDRS_Gateway2000/fdrs_config.h

75 lines
2.1 KiB
C
Raw Normal View History

2021-12-06 17:36:18 +00:00
// FARM DATA RELAY SYSTEM
//
// GATEWAY 2.000 Configuration
2022-01-30 03:17:27 +00:00
#define UNIT_MAC 0x01 // THIS UNIT
#define ESPNOW1_MAC 0x00 // ESPNOW1 Address
#define ESPNOW2_MAC 0x02 // ESPNOW2 Address
#define ESPNOW2_MAC 0x07 // ESPNOW2 Address
//Actions -- Define what happens when a packet arrives at each interface:
//Current function options are: sendESPNOW(interface), sendSerial(), sendMQTT(), and sendLoRa().
#define ESPNOW1_ACT sendSerial();
#define ESPNOW2_ACT sendSerial();
#define ESPNOWG_ACT sendSerial();
#define SERIAL_ACT sendESPNOW(0);
#define MQTT_ACT sendSerial();
#define LORA_ACT sendSerial();
//ESP32 Only
2021-12-08 02:55:02 +00:00
#define RXD2 21
#define TXD2 22
2021-12-07 17:36:45 +00:00
2022-01-30 03:17:27 +00:00
//#define USE_WIFI //You should not use ESP-NOW while WiFi is in use
2022-01-05 00:02:12 +00:00
#define WIFI_NET "Your SSID"
#define WIFI_PASS "Password"
#define MQTT_ADDR "192.168.0.8"
2021-12-07 17:36:45 +00:00
//#define USE_LORA
2022-01-05 00:02:12 +00:00
#define SCK 5
#define MISO 19
#define MOSI 27
#define SS 18
#define RST 14
#define DIO0 26
//433E6 for Asia
//866E6 for Europe
//915E6 for North America
#define BAND 915E6
2021-12-06 04:19:39 +00:00
2022-01-05 00:02:12 +00:00
#define ESPNOW1_DELAY 0
#define ESPNOW2_DELAY 0
#define ESPNOWG_DELAY 0
#define SERIAL_DELAY 0
#define MQTT_DELAY 0
#define LORA_DELAY 0
2021-12-06 04:19:39 +00:00
2022-01-05 00:02:12 +00:00
//Use these settings for a gateway that recieves ESP-NOW data and sends serial (UART).
2022-01-30 03:17:27 +00:00
//#define ESPNOW1_ACT sendSerial();
//#define ESPNOW2_ACT sendSerial();
//#define ESPNOWG_ACT sendSerial();
//#define SERIAL_ACT sendESPNOW(0);
//#define MQTT_ACT sendSerial();
//#define LORA_ACT sendSerial();
2022-01-05 00:02:12 +00:00
//Use these settings for a gateway that recieves serial (UART) data and sends MQTT.
//#define USE_WIFI
2022-01-06 20:47:37 +00:00
//#define ESPNOW1_ACT
//#define ESPNOW2_ACT
//#define ESPNOWG_ACT
//#define SERIAL_ACT sendMQTT();
//#define MQTT_ACT sendSerial();
//#define LORA_ACT sendSerial();
2022-01-30 03:17:27 +00:00
//Use these settings for a basic repeater.
//#define ESPNOW1_ACT sendESPNOW(2);
//#define ESPNOW2_ACT sendESPNOW(1);
//#define ESPNOWG_ACT sendESPNOW(1);
//#define SERIAL_ACT
//#define MQTT_ACT
//#define LORA_ACT