24931d8c4a
- Shortcut option for turning off the backlight in toolbar - Filament run-out sensor enable/disable in tune menu - Enhanced Host printing support - Better C10 support - Axis value in dash board shows actual position of the axes, including Z leveling - Raise Z to Probe Clearance position before of a Probing Z Reference - New ProUI Info box - Fix https://github.com/mriscoc/Ender3V2S1/issues/344 - Fix mesh slot load message bug - Enable support for Creality Slicer G-code file with embedded thumbnail for Ender3V2 Neo - Implements a user option for center the menu title by defining TITLE_CENTERED in configuration files - Force drawing of Z-axis value on screen redrawing - Automatically reboot to apply default settings on first boot after flash. - Code optimization From last Marlin bugfix 2.1.x - Emergency Parse M524 (#24761) - Fix inverse_accel redefine - Minor planner optimization (#24737) - UBL G28 leveling fix (#24622) - Fix / refactor shared PID (#24673) - Report M22 / M23 success / fail (#24706) - Constrain UBL within mesh bounds (#24631) - Other general fixes |
2 years ago | |
---|---|---|
.. | ||
Giadej compilation | 2 years ago | |
stock | 2 years ago | |
DWIN_SET-folder.jpg | 2 years ago | |
Giadej compilation.jpg | 2 years ago | |
Incompatible_DWIN_SET.jpg | 2 years ago | |
readme.md | 2 years ago |
readme.md
Display firmware, boot image and icons compilations
If you have the stock icons and display assets you don't need to update the display to use this firmware. Currently Creality provides two kinds of screen units:
Original Ender 3V2 DWIN display
Original Ender 3S1 DACAI display
The DWIN_SET
display firmware / icon assets only apply to the Ender 3V2 original display, for the Ender 3S1 you must to use the private
display firmware / icon assets.
Display firmware, boot image and icons compilations
This page list the display assets compilations compatible with Professional firmware fork. Not all icons compilations are available for the DWIN_SET and private.
How to install
- Get an µSD card of 8GB or less.
- Format the µSD card MBR, FAT32 and with a 4 KB sector size
- Copy the
DWIN_SET
or theprivate
directory in the Root of SD - Turn off your printer
- Disconnect and disassembly the screen unit
- Install the µSD card into the slot of the screen unit
- Reconnect the screen to the printer
- Turn on the printer and wait for the display to change color from blue to orange
- Verify that the screen assets were updated
- Turn off the printer and remove the µSD card from the screen unit
- Reassembly the screen unit
If you want to change only the icons, then you can leave only the 9.ICO file
inside of the DWIN_SET folder.
If you weren't able to update the display, verify the format of the µSD Card
(MBR, FAT32 and allocation unit of 4096 bytes) and the CRC of the files.
Be sure to leave only the DWIN_SET
or private
folder at the root of the card.
Stock display firmware
Giadej compilation
Updating printer firmware
For update your printer firmware and get the latest version go here: https://github.com/mriscoc/Ender3V2S1/releases/latest